2007.5-2010 LMM Duramax S&B Cold Air Intake KitNew841372036576
- Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Two large air inlet points
Description: - Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Two large air inlet points
Item #: 75-5091,75-5091D
Condition: New
This Product Cannot Ship to the State of California
Price: $349.00
2007.5-2010 LMM Duramax Allison 4x4 Transfer Case BraceNew
Fabricated tubular steel support connects rear housing of Allison transmission to transfer case reinforcing the weaker tail housing section to eliminate flex caused by driveline vibrations which ca...
Description: Fabricated tubular steel support connects rear housing of Allison transmission to transfer case reinforcing the weaker tail housing section to eliminate flex caused by driveline vibrations which...More Details »
Item #: WCF100135
Condition: New
10-15 Business Day Lead Time
Price: $154.00
2007.5-2014 Silverado 2500 / 3500 HD - Morimoto - XB LED Fog Lights, Square (Pair)New840203362471
- FOG LIGHTS: 2x Type C Morimoto XB LED (Square)
- Color: 5500K (Pure White)
- Input: Sealed 5202 Male
- WIRING: Plug-n-Play Connection Kit
- OPTICS: Kuria Fog-Projection Lens
- Compliance: IP...
Description: - FOG LIGHTS: 2x Type C Morimoto XB LED (Square)
- Color: 5500K (Pure White)
- Input: Sealed 5202 Male
- WIRING: Plug-n-Play Connection Kit
- OPTICS: Kuria Fog-Projection Lens
- Compliance:...More Details »
Item #: LF90
Condition: New
Price: $238.50
2007.5-2024 GM Fleece All Lights On ModuleNew670875716810
- Installs in minutes
- Allows low beams and fog lamps to stay on when your high beams are active for better nighttime visibility in rural areas
- Low beams and Fogs operate normally when High Be...
Description: - Installs in minutes
- Allows low beams and fog lamps to stay on when your high beams are active for better nighttime visibility in rural areas
- Low beams and Fogs operate normally when High Beams are not on
Item #: FPE-ALO
Condition: New
Price: $21.95
Air Filter 4" Inlet (Dry)New
- Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps your engine protected from harmful debris
- Lasts up to 30,000 miles on the highway
- Extend the ...
Description: - Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps your engine protected from harmful debris
- Lasts up to 30,000 miles on the highway
- Extend the life of the filter using compressed air
Item #: WCF100717
Condition: New
In Stock. Ships in 3-5 business days.
Price: $68.00
Air Filter 5" Inlet (Dry)New
- Dry Air Filter 5" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps your engine protected from harmful debris
- Lasts up to 30,000 miles on the highway
- Extend the ...
Description: - Dry Air Filter 5" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps your engine protected from harmful debris
- Lasts up to 30,000 miles on the highway
- Extend the...More Details »
Item #: WCF100719
Condition: New
In Stock. Ships in 3-5 business days.
Price: $68.00
BHP 01-10 GM 2500 / 3500 BEHIND Roll Pan 2 inch Hidden Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- All necessary hardware included
- Requires Frame Modification / Trimming for Installation
Description: - SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- All necessary hardware included
- Requires Frame Modification / Trimming for Installation
Item #: BHP1001, BHP1027
Condition: New
In Stock. Ships in 3-5 business days.
Price: $495.00
BHP 07.5-10 GM Long Box BELOW Roll Pan 2 inch Receiver HitchNew
*LONG BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: *LONG BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1035
Condition: New
In Stock. Ships in 3-5 business days.
Price: $495.00
BHP 07.5-10 GM Stock Bumper 2 inch Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: - SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1004, BHP1005
Condition: New
In Stock. Ships in 3-5 business days.
Price: $495.00
BHP 07.5-19 LMM / LML / L5P GM Short Box BELOW Roll Pan 2 inch Receiver HitchNew
*SHORT BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: *SHORT BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1034
Condition: New
In Stock. Ships in 3-5 business days.
Price: $495.00
BHP 2" License Plate Mount BracketNew
- Designed for use with BHP 2 inch receiver behind roll pan hitches
- Includes hardware for mounting license plate to bracket
- Easy to install with basic hand tools
- Semi-Gloss Black Powder Co...
Description: - Designed for use with BHP 2 inch receiver behind roll pan hitches
- Includes hardware for mounting license plate to bracket
- Easy to install with basic hand tools
- Semi-Gloss Black Powder Coat Finish
- Made in USA
Description: - Aluminum Fabricated Cover
- Stainless Hardware
- Fill Plug
- Custom Powder Coat Finish
- Made in USA
Item #: WCF100113
Condition: New
WCFab Red, Gloss White, and Gloss Black in stock and ships in 3-5 business days. 10-15 business day lead time on other colors.
Price: $354.00
Edge EAS Competition KitNew810115012320
98617 - EAS Competition Kit includes:
- EAS Starter Kit
- EAS EGT Probe
- EAS Universal 5 Volt
- EAS 0-100 PSIg Pressure Sensor
- EAS -40F to 300F Temperature Sensor
Description: 98617 - EAS Competition Kit includes:
- EAS Starter Kit
- EAS EGT Probe
- EAS Universal 5 Volt
- EAS 0-100 PSIg Pressure Sensor
- EAS -40F to 300F Temperature Sensor
Item #: 98617
Condition: New
Price: $473.95
Edge EAS EGT Kit (Daily Driver/Tow Kit)New810115013068
EAS EGT Kit (Daily Driver/Tow Kit)
Includes the EAS Starter Cable and EGT Probe.
Description: -Mount Bracket
-Grade 8 Hardware
-Zinc primer & Semi gloss black powder coat finish
Item #: WCF100265
Condition: New
In Stock. Ships in 3-5 business days.
Price: $95.00
FASS High Output Heater DiskNew860003521199
When the fuel temperature drops below 34° Fahrenheit, the thermostatically controlled High Output Fuel Heater Disk will automatically power on. Fuel is then heated by the 300 watt heating element ...
Description: When the fuel temperature drops below 34° Fahrenheit, the thermostatically controlled High Output Fuel Heater Disk will automatically power on. Fuel is then heated by the 300 watt heating element...More Details »
Item #: HK-1002
Condition: New
Free Ground Shipping
Price: $160.55
FASS Titanium Signature Series 100 GPH Lift Pump for 2001-2010 DuramaxNewItem #: TSC10100GFASS Fuel Systems
- Eliminates Leak Prone Primer Bulb from Trucks Running Aftermarket Lift Pumps
- Includes 1/8" NPT Port for Low Pressure Fuel Pressure Gauge or Sensor
- Includes billet fuel primer cap, install h...
Description: - Eliminates Leak Prone Primer Bulb from Trucks Running Aftermarket Lift Pumps
- Includes 1/8" NPT Port for Low Pressure Fuel Pressure Gauge or Sensor
- Includes billet fuel primer cap, install hardware, and 1/8" NPT Plug
- OEM style fitment that requires no tank cutting or drilling
- Compatible with external lift pumps rated up to 220 GPH
- Eliminates 1/4 tank issues common to draw straw
- Prevents need to drill...
Description: - OEM style fitment that requires no tank cutting or drilling
- Compatible with external lift pumps rated up to 220 GPH
- Eliminates 1/4 tank issues common to draw straw
- Prevents need to drill...More Details »
Item #: FPE-SF-GM-0410
Condition: New
Price: $359.00
G&R Diesel Billet Aluminum Tank Sump w/ Integrated ReturnNew
- Eliminates need to run return line to top of tank or cut into fuel filler neck
- Feed sized to -8AN - Capable of supplying the biggest lift pumps on the market
- Built in -4AN Drain
- Installs...
Description: - Eliminates need to run return line to top of tank or cut into fuel filler neck
- Feed sized to -8AN - Capable of supplying the biggest lift pumps on the market
- Built in -4AN Drain
- Installs...More Details »
Item #: GRD00153
Condition: New
Price: $199.00
GM 7 & 4 Pole Trailer Connector Socket w/Mounting BracketNew
- Allows for easy hidden access to hook up your trailer's electrical.
- Comes with both 7 and 4 pole connections
- Super easy to install with basic hand tools.
Description: - Allows for easy hidden access to hook up your trailer's electrical.
- Comes with both 7 and 4 pole connections
- Super easy to install with basic hand tools.
LB7/LLY/LBZ/LMM Duramax Twin Turbo Oil Line Kit (S400)New
-Stainless Braided #8 Drain Line 30"
-Stainless Braided #4 Feed Line 30"
-1/4" x #4 Fitting for Turbo Feed
-3/8" NPT X #8 45* Fitting for Oil Pan
-M14 Fitting for Oil Feed from Engine Block
Description: -Stainless Braided #8 Drain Line 30"
-Stainless Braided #4 Feed Line 30"
-1/4" x #4 Fitting for Turbo Feed
-3/8" NPT X #8 45* Fitting for Oil Pan
-M14 Fitting for Oil Feed from Engine Block
Item #: WCF100378
Condition: New
In Stock. Ships in 3-5 business days.
This Product cannot ship to the state of California
Price: $179.00
LB7/LLY/LBZ/LMM Duramax Twin Turbo Oil Line Kit (S500)New
- #6 Oil Feed Line
- #10 Oil Drain Line
- Parker stainless braided drain and feed lines
- Fittings for turbo, oil pan and engine block
This Product cannot ship to the state of California
Price: $270.00
LB7/LLY/LBZ/LMM/LML Duramax S400 Single Turbo Oil Line KitNew
-Parker stainless braided #10 drain and #4 Feed Line
-Plug for OEM feed location in valley
-Fitting for turbo Feed
-Fitting for engine block oil galley
-Turbo drain flange and fitting
-Flange...
Description: -Parker stainless braided #10 drain and #4 Feed Line
-Plug for OEM feed location in valley
-Fitting for turbo Feed
-Fitting for engine block oil galley
-Turbo drain flange and fitting
-Flange for rear engine cover
Item #: WCF100397
Condition: New
In Stock. Ships in 3-5 business days.
This Product cannot ship to the state of California
