2003-2007 5.9 Cummins Smarty UDC MM3 Custom Performance ECM Tuning

Calibrated Power Solutions Emissions Intact custom Smarty UDC MM3 tuning packages include everything you need to tune your 2003-2007 5.9 Cummins equipped Dodge Ram 2500, 3500, 4500, or 5500 HD. Does NOT delete or tamper with emissions equipment to get the best performance out of your truck. 

Calibrated Power's 5.9L Cummins Tuning Packages unlock the power potential of your truck.

The factory rated output for the 2006-2007 5.9L Cummins is 325 HP and 610 ft-lbs of torque. This is an improvement from previous models but pales in comparison to the +100 RWHP you'll have access to with custom performance tuning.

Calibrated's tuning options give you the power to tow light or heavy, fun daily driving, and the most performance we can unleash from your engine.  Have the cleanest and most reliable tunes available with the power level you need right at your fingertips. 

Do you need CPS Switch-On-The-Fly (SOTF) Smarty MM3 Custom Tuning?

• Total flexibility to select the power level you need  
• Designed to be safe for your engine and emissions equipment
• Fully customized tuning with more than 100+ calibration changes from stock
• More power and less soot than box programmers
• World Class Customer Service Support from the team at Calibrated Power Solutions!

Sport Tune

• Peak Horsepower & Torque +100 RWHP +180 Ft-lbs (up to +230 RWHP w/ Built Trans)
• Fastest possible acceleration - Truck feels lighter
• No dead pedal feeling
• Most power & torque you can add while maintaining OEM levels of reliability

• Biggest Adrenaline Rush We Can Give You
• Love driving the truck and the looks you'll get from your passengers
• Throttle pedal responds exactly how you want
• Too much power for towing without the proper gauges
• Enough power for an irresponsible driver to damage their truck

Street Tune

• Great for Daily Driving
• Reliable Performance you can use
• Smooth power curve that’s fun to drive
• Air-Fuel Ratio limits built into calibration to limit soot production

• Horsepower & Torque Increase +80 RWHP + 150 ft-lbs
• Mix of fun and superior drivability
• Faster acceleration
• No dead pedal feeling, throttle responds how you want it to

Light Tow

• Balance between Daily Driving and Towing
  • Smooth power curve that’s fun to drive
  • Air-Fuel Ratio limits built into calibration to limit soot production
  • Designed to tow less than 8,000 lbs.

• Horsepower & Torque Increase +60 RWHP +100 ft-lbs
  • Get your truck up and moving more quickly
  • More useable power in all driving scenarios
  • Have enough power to “Shift Up, Throttle Back”

• Revised pedal sensitivity
  • Low speed trailer maneuvering
  • Back up with trailer without lurching

Heavy Tow

• Safe for Towing Heavy
  • Increase power, not EGTs (Exhaust Gas Temperature)
  • Air-Fuel Ratio limits built into calibration to limit soot production
  • Designed to tow 8,000 lbs. up to GVW

• Horsepower & Torque Increase +40 RWHP +60 ft-lbs
  • Get your trailer up and moving more quickly
  • Lug in the gear you want while towing
  • Have enough power to “Shift Up, Throttle Back”

• Revised pedal sensitivity
  • Low speed trailer maneuvering
    Back up with trailer without lurching

 Optimized Stock

• Slight revisions to factory calibration
• No significant increase of peak power
• Good for troubleshooting a physical problem with your truck
• Great for when someone else drives your truck

Smarty MM3 Hardware Required

• 4.3″ Touch Display. Resolution 480 x 272 – 16.3 million colors.
• Two devices: MM3 Touch Display and MM3 Controller each with its own CPU. The Display for the graphics & user interface and the controller for communicating with the ECM.
• Twin CPU design. The fastest Display & Tuner on earth!
• Fastest display start up in the industry. Just four seconds!
• Fastest PID refresh speed in the industry.
• Fastest ECM download in the industry, up to three times faster than the competition, a typical ECM update takes 1.5 to 6 minutes, depending on the model year.
• Small micro USB cable connecting the display and the controller for easy installation.
• Micro SD card for simple and fast updates (included).
• Fully Internet update-able. Updates are always FREE!
• Micro SD card can store multiple UDC custom tunes.
• Works with any Micro SD FAT file system formatted card.
• EGT sensor  Reads accurately up to over 2200°F.

• Four dashboards, each configurable with five different gauge layouts.

  • Freely configurable gauge(s) range.
  • Two alarms (high and a low range) can be configured for each PID.
  • Audible and/or visible alarms can be configured.
  • Configured ranges are also displayed through colored bars in all digital gauges.
  • Configurable PID refresh speed.
  • Each gauge stores/updates and displays the max reached PID value continuously.
  • Recorded max values can be reset at any time.
  • Customize-able display background.
  • Adjustable sound feedback for alarms.

Recommended Options

MM3 Exhaust Gas Temperature Probe

• • Reads accurately up to over 2200°F. (Purchased Separately Here)
  • Monitors Exhaust Gas Temperature directly on your exhaust manifold
  • Make sure your truck is always operating in a safe range

G56 Manual Transmission

While the G56 Manual Transmission has no electronic controller to calibrate, this ECM Tuning is built to work specifically with them. Calibrated Power understands where to bring the power on in the throttle pedal to keep you shifting smooth and still make more power.