Description: -Exhaust Manifold
-Precision CNC Machined from 1018 Mild Steel Billet
-Techline Coated in Satin Black
-Manifold Gaskets
-T4i Gasket
-T4i Flange Hardware
Item #: 6.7T4i
Condition: New
Currently back ordered. Ships in 6-8 weeks.
Please Note: Cannot ship to the state of California. Only ships via USPS, any selections for expedited shipping are automatically defaulted to ground service for this part.
Price: $755.00
Edge Insight CTS3 Gauge MonitorNew810009938903
Observe and understand your vehicle parameters using Edge state-of-the-art technology. The Edge Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This di...
Description: Observe and understand your vehicle parameters using Edge state-of-the-art technology. The Edge Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This...More Details »
Item #: 84130-3
Condition: New
Price: $419.95
10-18 Dodge / Ram Urethane Roll PanNew
- Allows for removal of the stock rear bumper
- Easy installation with basic hand tools
- All necessary hardware included
Description: - Allows for removal of the stock rear bumper
- Easy installation with basic hand tools
- All necessary hardware included
Item #: BHP6005
Condition: New
These products are currently experiencing longer than normal lead times. Please contact us for current availability.
Price: $359.00
1998-2021 5.9L and 6.7L Cummins Billet Aluminum Brake Master Cylinder Cap, Black AnodizedNew
- CNC Machined Billet Cap is a direct OEM Replacement, not a cover
- Made in USA
- Black Anodized Finish
- Installs in seconds
- Reuses diaphragm from existing cap
Description: - CNC Machined Billet Cap is a direct OEM Replacement, not a cover
- Made in USA
- Black Anodized Finish
- Installs in seconds
- Reuses diaphragm from existing cap
- CNC Machined Billet Cap is a direct OEM Replacement, not a cover
- Made in USA
- Clear Anodized Finish
- Installs in seconds
- Reuses diaphragm from existing cap
Description: - CNC Machined Billet Cap is a direct OEM Replacement, not a cover
- Made in USA
- Clear Anodized Finish
- Installs in seconds
- Reuses diaphragm from existing cap
Item #: WCF100257
Condition: New
In Stock. Ships in 5-7 business days.
Price: $35.00
1998.5-2018 Cummins 24V 5.9L/6.7L ARP Custom Age 625+ Head Stud KitNew
- ARP Custom Age 625+ Material
- 260,000 PSI Tensile Strength
- Chrome-moly Steel, 12-Point Nuts
- Parallel-Ground Washers Included
- Sold as a kit
- Made in USA
- For Competition Use
Description: - ARP Custom Age 625+ Material
- 260,000 PSI Tensile Strength
- Chrome-moly Steel, 12-Point Nuts
- Parallel-Ground Washers Included
- Sold as a kit
- Made in USA
- For Competition Use
Item #: 247-4204
Condition: New
Limited Supply
This product is currently experiencing longer than normal lead times. Please call for availability.
Price: $1,270.00
1998.5-2018 Cummins 5.9L/6.7L 24V ARP-2000 Head Stud KitNew
- ARP 2000 Material
- 220,000 PSI Tensile Strength
- Chrome-moly Steel, 12-Point Nuts
- Parallel-Ground Washers Included
- Black Oxide Finish
- Sold as a kit
- Made in USA
Description: - ARP 2000 Material
- 220,000 PSI Tensile Strength
- Chrome-moly Steel, 12-Point Nuts
- Parallel-Ground Washers Included
- Black Oxide Finish
- Sold as a kit
- Made in USA
Item #: 247-4202
Condition: New
This product is currently experiencing longer than normal lead times. Please call for availability.
Price: $490.00
2003-2018 Cummins Baja Designs 30" LED Light Bar MountNew
Includes:
- Left and Right Powdercoated Brackets
- Replacement Hardware
Description: - TIG Welded Fabricated Aluminum Cover for Plastic Reservoir
- Utilizes OEM Mounting Points and Hardware
- Installs in minutes with basic hand tools
- Custom Powder Coat Finish
Item #: WCF100209
Condition: New
40-50 Business Day Lead Time
Price: $149.00
2006-2021 5.9L and 6.7L Cummins WCFab X D&J Precision Billet Valve CoverNew
- Made from aircraft quality 6061-T6 aluminum
- Features a baffled breather system
- Includes a WCFab Engraved Cap
- Powder coated in your choice of color
- Includes D&J's custom billet breat...
Description: - Made from aircraft quality 6061-T6 aluminum
- Features a baffled breather system
- Includes a WCFab Engraved Cap
- Powder coated in your choice of color
- Includes D&J's custom billet...More Details »
Item #: WCF100366
Condition: New
40-50 Business Day Lead Time
This Product cannot ship to the state of California
Price: $595.00
2007.5+ Cummins Goerend 68RFE Deep Pan New
- Goerend Lightweight Cast-Aluminum 68RFE Transmission Pan
- CNC machined
- Holds an additional 4 quarts of fluid compared to a stock transmission pan
- Patented sloped floor design results i...
Description: -4" Intake
-Dry Air filter
-Outerwear's Pre-Filter Cover
-Boot and Clamps
-Powder coating
Item #: WCF100863
Condition: New
40-50 Business Day Lead Time
This Product cannot ship to the state of California
Price: $419.00
2007.5-2018 6.7L Cummins Banks Monster-Ram Intake System w/Fuel LineNew
- Get back all the power you lose with the stock intake elbow
- Gain a more responsive, power efficient engine
- Improves airflow from the intercooler. Raises boost without increasing backpressu...
Description: - Get back all the power you lose with the stock intake elbow
- Gain a more responsive, power efficient engine
- Improves airflow from the intercooler. Raises boost without increasing backpressure at the turbine
Item #: 42793, 42797, 42798
Condition: New
Lead time for 42793 is 40-50 business days. 42797 and 42798 are currently experiencing longer than normal lead times. Shipping may be delayed.
50 State Compliant CARB E.O. D-161-143 (2013-2018)
Description: Bolt-on, upgraded turbo for your 2010-2012 (HE351VE) 6.7L Cummins
- Airflow to Support 700+ RWHP
- Dyno verified 650 RWHP capable with stock emissions equipment
- Tested in competition setups...More Details »
Item #: DT1204000020000
Condition: New
This Product cannot ship to the state of California
Price: $3,300.00
2010-2012 6.7L Cummins S&B Cold Air Intake KitNew
- Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Available in either 8-layer Cotton Cleanable or Dry E...
Description: - Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Available in either 8-layer Cotton Cleanable or Dry Extendable media
Item #: 75-5092, 75-5092D
Condition: New
Price: $349.00
2010-2012 6.7L Cummins S300 High Mount 2nd Gen Swap KitNew
-4" Down Pipe (Mates to Exhaust System V-band)
-4" Intake
-Dry Air Filter
-Outerwear's Pre-Filter Cover
-Stainless Oil Feed and Drain Line with Fittings
-3" Hot Side Inter cooler Pipe (V-band ...
Description: -4" Down Pipe (Mates to Exhaust System V-band)
-4" Intake
-Dry Air Filter
-Outerwear's Pre-Filter Cover
-Stainless Oil Feed and Drain Line with Fittings
-3" Hot Side Inter cooler Pipe (V-band...More Details »
Item #: WCF100477
Condition: New
40-50 Business Day Lead Time
This Product cannot ship to the state of California
Price: $1,299.00
2010-2012 6.7L Cummins S400 High Mount 2nd Gen Swap KitNew
-4" Down Pipe (Mates to Exhaust system v-band)
-5" Intake with sensor bungs
-S&B Dry Air Filter
-Outerwear's Pre-Filter Cover
-#6 Stainless Oil Feed Line & Fitting
-#10 Stainless Oil Drain Lin...
-5" Intake
-Dry Air filter
-Outerwears Pre-Filter Cover
-Stainless Steel Oil Feed and Drain Lines with Fittings
-4" Turbo Down Pipe
-3" Turbo Hot Side Cross Over Pipe
-3" Cold Charge Pipe Bet...
Description: -5" Intake
-Dry Air filter
-Outerwears Pre-Filter Cover
-Stainless Steel Oil Feed and Drain Lines with Fittings
-4" Turbo Down Pipe
-3" Turbo Hot Side Cross Over Pipe
-3" Cold Charge Pipe...More Details »
Item #: WCF100569
Condition: New
40-50 Business Day Lead Time
This Product cannot ship to the state of California
Price: $2,495.00
2010-2012 6.7L Cummins Banks Boost Tube SystemNew
Up to 103% greater flow area than stock tubes
Increase hot side flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side t...
Description: Up to 103% greater flow area than stock tubes
Increase hot side flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side...More Details »
Up to 67% greater flow area than stock tube
OEM replacement for left side boost tube (Driver side, Cold side) with silicone couplers. 67% greater flow area compared to stock. Better flowing interc...
Description: Up to 67% greater flow area than stock tube
OEM replacement for left side boost tube (Driver side, Cold side) with silicone couplers. 67% greater flow area compared to stock. Better flowing...More Details »
Item #: 25964
Condition: New
40-50 Business Day Lead Time
50 State Compliant CARB E.O. D-161-122
Price: $249.00
2010-2018 6.7L Cummins AMP Research PowerStepNew
- Fits 6.7L Cummins Ram Trucks, All Cab Configurations
- Includes Mounting Hardware
- Requires Drilling
Description: - Fits 6.7L Cummins Ram Trucks, All Cab Configurations
- Includes Mounting Hardware
- Requires Drilling
Item #: 75138-01A-B
Condition: New
This product is currently experiencing longer than normal lead times. Please allow additional 5 weeks when placing your order.
Free Ground Shipping
Price: $1,399.00
2010-2018 6.7L Cummins Baja Designs SAE Fog Pocket KitsNew
Includes:
- Brackets / Hardware
- Your choice of (4) Amber (Selective Yellow) or White SAE Squadrons
- Plug and Play Adapter (CAN-BUS System vehicles are not Plug and Play)
Description: Includes:
- Brackets / Hardware
- Your choice of (4) Amber (Selective Yellow) or White SAE Squadrons
- Plug and Play Adapter (CAN-BUS System vehicles are not Plug and Play)
- If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary.
- Mounts to allow the factory fuel return lines to be used withou...
Description: - If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary.
- Mounts to allow the factory fuel return lines to be used without any relocating or bending
Item #: FPE-FFD-RO-4G
Condition: New
Price: $59.95
2010-2018 6.7L Cummins Upper Coolant Pipe for Single RadiatorNew
BHP 03-18 Dodge Short/Long Bed BEHIND Roll Pan 2 inch Hidden Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
- For 2500/3500 trucks only
Description: - SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
- For 2500/3500 trucks only
Item #: BHP10012
Condition: New
This item is currently back ordered. Please call for current availability.
Price: $495.00
BHP 03-18 Dodge Short/Long Bed Stock Bumper 2 inch Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
This Product cannot ship to the state of California
Price: $199.00
Dodge 7 & 4 Pole Trailer Connector Socket w/Mounting BracketNew
- Allows for easy hidden access to hook up your trailer's electrical
- Comes with both 7 and 4 pole connections
- Easy to install with basic hand tools
Description: - Allows for easy hidden access to hook up your trailer's electrical
- Comes with both 7 and 4 pole connections
- Easy to install with basic hand tools
Item #: BHP4003
Condition: New
In Stock. Ships in 5-7 business days.
Price: $75.00
Dodge, Ford, Universal 60" Traction Bar Kit (RCLB, ECSB, CCSB)New
***For Regular Cab Long Bed, Extended Cab Short Bed and Crew Cab Short Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-60" Heavy Duty Bars
-Poly Bushings
...
Description: ***For Regular Cab Long Bed, Extended Cab Short Bed and Crew Cab Short Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-60" Heavy Duty Bars
-Poly Bushings...More Details »
Item #: WCF100854
Condition: New
40-50 Business Day Lead Time
Price: $779.00
Dodge, Ford, Universal 68" Traction Bar Kit (ECLB, CCLB)New
***For Extended Cab Long Bed and Crew Cab Long Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-68" Heavy Duty Bars
-Poly Bushings
-RockJock Johnny Joints
...
Description: ***For Extended Cab Long Bed and Crew Cab Long Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-68" Heavy Duty Bars
-Poly Bushings
-RockJock Johnny Joints...More Details »
